Gun Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
724 Posts
If you want and Uzi get an Uzi; not a Mac-10, Cobray or some similar knockoff, they are not worth the money.

Stick with the open bolt guns. The closed bolt guns just plain fire to fast. Yea A cyclic rate of 1500rpm is cool but its way to fast to control in a gun this size. The standard 600 rpm is enough, if you just gotta have more speed changeing the spring and buffer will gain you a few hundred rpm for just a few dollars.

If you wanna trick it out try a Para micro, small, compacted and come with piccatiny rails. The have a slightly different grip than other UZi's so you can use Glock 33rnd mags in them. Assuming you're getting a 9mm

In my personal experience Uzi's are the Ak of the SMG world. They may not be pretty or coolest but they work. They were designed to do a job and they do it very well.

P.S if you like Uzi's check out a scorpion machine pistol
 

·
Registered
Joined
·
724 Posts
With a closed bolt gun like some of the mini's and micro you can get away with the high cyclic rate by mounting a laser on the gun and sighting it 1 round at a time. When this is done you use it like a mini shotgun with buck shot. With a folding stock gun, put the stock to shoulder and off hand on the bottom of the mag. you get enough control to walk the bursts up the target. Not real accurate but just as effective as 00 buck
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top