Gun Forums banner
1 - 3 of 3 Posts

· Registered
724 Posts
Discussion Starter · #1 ·
I was shooting steels today with my buds and 2 of my mags) a 10 and a 20) started sticking in the mag well. I had about 300rds through the gun when they started hanging up.

We were shooting 50 target rounds with 10 mins between rounds, sometimes more sometimes less depending. So they shouldn't have been getting all that hot. I've shot a lot more rounds in less time and never had a problem before.

They still function fine but need to be pulled out. I though maybe some powder build up so I clean the gun and mags good tonight and they still hung up. I also tried them in my other 226 and it's the same the work fine but need to be pulled free.

It doesn't feel like thay are catching on anything just tight

any Ideas?

· Premium Member
7,388 Posts
Yeah you are going to have to remove material. Id use some emery paper backed by a file to get teh high spots first that would hand up. Then if they are blued you can touch them up with cold blue.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.